HandyTone 502 2FXS
ATA con 2 puertos FXS,Prioriza la voz sobre los datos
Productos más vistos
-
Sistema de...
sistema de control de audio - snom PA1
-
EXP38...
Telefono IP T28P soporta hasta 2 botoneras
-
GXP2020 EXT...
Telefono IP GXP2020 Puede soportar hasta...
Novedades
- D100 - 240E tarjeta transcodificación Sangoma
- D100-240E tarjeta transcodificacion Sangoma...
- D100 - 240 tarjeta transcodificación Sangoma
- Sangoma D100-240 Tarjeta transcodificación...
- D100 -120E tarjeta transcodificación Sangoma
- Sangoma D100-120E tarjeta transcodificacion...
- D100 -120 tarjeta transcodificación Sangoma
-  D100 -120 tarjeta transcodificacion Sangoma...
- A200S modulo Sangoma
- Módulo A200S Sangoma
Módulo para tarjeta...
 |
| Anuncio publicitario |
6 otros productos de la misma categoría:
Opine sobre este producto
El HT502 es un potente router VoIP. El producto de la inclusión de un sistema integrado de alta router NAT rendimiento y puertos de 10 Mbps Ethernet WAN y LAN permite una conexión de banda ancha compartida entre múltiples dispositivos Ethernet. Además de ser compatible con SIP 2.0 estándar, el producto es compatible con Universal Plug-en-Play (UPnP), hasta 2 perfiles de cuenta SIP y avanzadas funciones de telefonÃa.
»Mejora de la seguridad
»Aprovisionamiento automatizado de voz utilizando simétrica y asimétrica
»Soporte para un amplio rango de voz popular códec
| Ethernet Ports | 2 RJ45 (LAN/WAN) |
| NAT/Router | Yes |
| DHCP | Client/Server |
| FXS Port | 2 |
| FXO Port | No |
| PSTN Pass-through Port | No |
| Voice Mail Indicator | Yes |
| Voice Codec | G.711(a/?law), iLBC, G.723, G.729A/B/E, G.726, T.38(fax) |
| Remote Configuration | TFTP/HTTP |
Especificaciones
Â
| Telephone Interfaces | 2 FXS ports, 2 SIP accounts |
| Network Interface | Two (2) 10M/100 Mbps, RJ-45 |
| LED Indicators | Power, WAN, LAN, PHONE1 and PHONE2 |
| Reset Button | Factory Reset button. |
| Voice over Packet Capabilities | Voice Activity Detection (VAD) with CNG (comfort noise generation) and PLC (packet loss concealment), Dynamic Jitter Buffer, Modem detection & auto-switch to G.711, Packetized Voice Protocol Unit (supports RTP/RTCP and AAL2 protocol), G.168 compliant Echo Cancellation, LEC (line echo cancellation) with NLP |
| Voice Compression | G.711 + Annex I (PLC), Annex II (VAD/CNG format) encoder and decoder, G.723.1A, G.726(ADPCM), G.729A/B/E, iLBC G.726 provides proprietary VAD, CNG, and signal power estimation Voice Play Out unit (reordering, fixed and adaptive jitter buffer, clock synchronization), AGC (automatic gain control), Status output, Decoder controlling via voice packet header |
| DHCP Server/Client | Yes, NAT Router or Switched Mode |
| Fax over IP | T.38 compliant Group 3 Fax Relay up to 14.4kpbs and auto-switch to G.711 for Fax Pass-through (pending), Fax Datapump V.17, V.19, V.27ter, V.29 for T.38 fax relay |
| QoS | Diffserve, TOS, 802.1 P/Q VLAN tagging |
| IP Transport | RTP/RTCP |
| DTMF Method | Flexible DTMF transmission method, user interface of In-audio, RFC2833, and/or SIP Info |
| IP Signaling | SIP (RFC 3261) |
| Provisioning | TFTP, HTTP, HTTPS (pending) |
| Control | TLS/SIPS |
| Management | Syslog support, HTTPS and telnet (pending), remote management using Web browser, Auto/manual provisioning system Support Layer 2 (802.1Q, VLAN, 802.1p), Layer 3 QoS (Tos, DiffSery, MPLS) |
| Power | Output: 12VDC, 0.5A / Input: 100-240 VAC/50-60 Hz |
| Environmental | Operational: 32°-104°F or 0°-40°C Storage: 10°-130°F / Humidity: 10-90% Non-condensing |
|
Dimensions (H x W x D) |
25mm x 115mm x 75mm (when laying flat); 115mm x 25mm x 75mm (standing up) |
| Short & long haul | REN3: Up to150 ft on 24 AWG line |
| Call Handling Features | Caller ID display or block, Call waiting caller ID, Call waiting/flash, Call transfer, hold, forward, mute, 3-way conferencing |
| Caller ID | Bellcore Type 1 & 2, ETSI, BT, NTT, and DTMF-based CID |
| Polarity Reversal / Wink | Yes |
| EMC | EN55022/EN55024 and FCC part15 Class B |
| Safety | UL |
En Twitter
